Parkside PADM 1250 A1 Traduccion Del Manual De Instrucciones Originale página 23

Proper use
The device is designed for planing and
thicknessing rough sawn timber.
The machine is intended to be used by do-
it-yourselfers. It was not designed for heavy
commercial use.
The device is intended for use by adults.
The device is not suitable for use with a
standard vacuum cleaner.
The manufacturer is not liable for damage
caused by improper use or incorrect oper-
ation.
General description
An illustration of the most im-
portant functional components
can be found on the front and
the back fold-out pages.
Scope of delivery
Unpack the device and check for complete-
ness. Dispose of the packaging material
properly.
- Planer Thicknesser
- Collection container with connection
for external dust extraction
- Allen key
- Crank handle
- Rip fence
- Push stick
- Blade setting block
- Adapter for external dust extraction
- Instruction manual
Description of functions
Please refer to the descriptions below for
information on how the operating elements
work.
Overview
1 Rip fence
2 Star grip screw
3 Crank handle
4 Feed table
5 Adjusting screw, surface planer cut-
ting depth
6 Scale, surface planer
7 Tab
8 Overload switch
9 On switch
10 Off switch
11 Machine housing
12 Butterfl y screw
13 Recess
14 Discharge table
15 Allen key
16 Collection container with connection
for external dust extraction
16a Adapter for external dust extraction
17 Blade setting block
18 Push stick
19 Hexagon socket screws
A
20 Holder
B
21 Latch
C
22 Small screw
C
23 Planing table
C
24 Anti-kickback claws
C
25 Planer blade cover
D
E 26 Scale, rip fence
E 27 Star grip nut
F 28 Star grip screw
H 29 Bracket, push stick
H
30 Bracket, mains cable
I
31 Scale, thicknesser
J
32 Hexagon socket screws
J
33 Guide
J
34 Planer blade
J
35 Adjusting screws
J
36 Blade shaft
GB MT
23