Publicidad
Idiomas disponibles
Idiomas disponibles
GB
4. Initial setup
1. Affix the stickers enclosed with the tank
documents permanently and firmly to the tank.
A
B
C
Labelling DT-Mobile PRO generator tank on both sides
(front and rear)
A
UN 1202 for diesel
Hazard label
B
(flame on red background)
environmentally hazardous
C
substances (tree - fish)
2. Fill the tank (see section 5.4).
Unscrew cap from filling connection b.
The container is filled using a delivery nozzle
with an automatic shut-off. Optionally, the
container can also be filled using a fixed filling
connection and limiting value transmitter
(only DT-Mobile PRO ST).
3. After completing the test filling, close the filling
opening tight using the cap.
►
The filling station is now ready for operation.
26
5. Operation
5.1 Storage
Do not expose the DT-Mobil to direct sunlight for
extended periods either during transport or when in
storage. Excessive heating can degrade the quality
of the high-grade plastic container.
If heating produces overpressure in the sealed
container, this overpressure will be released via
the safety valve e .
Suitable storage conditions:
• ambient temperatures from - 10 °C to + 40 °C.
• level surface.
• canopy for storage outdoors
5.2 Loading the filling station
Risk of injury!
The lid must be closed.
5.2.1 Moving with lifting truck
The DT-Mobile can be moved with the lifting truck
on a firm, level surface. The lifting point is between
the forklift slots on the underside.
5.2.2 Loading with a forklift
Important!
i
Use the provided forklift slots on the
underside as lifting points for safe lifting
with the forklift.
Publicidad
