Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 3
Position wheel (Y) on bottom of smoker body (A).
Secure using M6 x 9 mm screws (CC). Repeat
procedure on opposite side for remaining wheel (Y).
Hardware Used
CC
M6 x 9 mm Screw
STEP 4
Insert adjustable screw leg (M) through bottom of side
panel (L) and secure into smoker body (A). Repeat
procedure on opposite side for remaining adjustable
screw leg (M).
Note: When unit is upright, set adjustable screw leg (M)
height by turning clockwise or counterclockwise so that
smoker is level. Once level, secure leg positions by
tightening tension nuts.
7
ASSEMBLY
x 8
3
CC
4
ÉCROUS DE SERRAGE
TENSION NUT
M
A
CC
Y
L
A
Publicidad
