Electrolux EIS62453IZ Manual De Instrucciones página 108

2. To deactivate the function: press
The previous heat setting appears.
7.3 Lock
You can lock the control panel while the hob
operates. It prevents an accidental change of
the heat setting.
Set the heat setting first.
To activate the function: press
To deactivate the function: press
The function deactivates as you
deactivate the hob.
7.4 Child Safety Device
This function prevents an accidental
operation of the hob.
To activate the function: press
set any heat setting. Press and hold
seconds, until the indicator above the symbol
appears. Deactivate the hob with
The function stays active when you
deactivate the hob. The indicator above
is on.
To deactivate the function: press
not set any heat setting. Press and hold
for 3 seconds, until the indicator above the
symbol disappears. Deactivate the hob with
.
Cooking with the function activated: press
, then press for 3 seconds, until the
indicator above the symbol disappears. You
can operate the hob. When you deactivate
the hob with the function operates again.
108 ENGLISH
7.5 Bridge
.
The function operates when the pot
covers the centres of the two zones. For
more information on the correct
placement of cookware refer to "Using
the cooking zones".
The function does not work while
SenseBoil® operates.
.
This function connects two left side cooking
again.
zones and they operate as one.
First set the heat setting for one of the left
side cooking zones.
To activate the function: touch
change the heat setting touch one of the
control sensors.
To deactivate the function: touch
cooking zones operate independently.
. Do not
7.6 Hob²Hood
for 3
It is an advanced automatic function which
.
connects the hob to a special hood. Both the
hob and the hood have an infrared signal
communicator. Speed of the fan is defined
automatically on basis of mode setting and
temperature of the hottest cookware on the
hob. You can also operate the fan from the
hob manually.
. Do
For most of the hoods the remote system
is originally deactivated. Activate it before
you use the function. For more
information refer to hood user manual.
Operating the function automatically
To operate the function automatically set the
automatic mode to H1 – H6. The hob is
originally set to H5. The hood reacts
whenever you operate the hob. The hob
recognizes temperature of the cookware
automatically and adjusts the speed of the
fan.
. To set or
. The