UFESA CF Nepal Manual De Instrucciones página 21

• This product contains a light source of energy
efficiency class E - (EU) 2019/2015 (Only for mo-
dels with include light) XGD-QY-24W-56SMD
• Means for disconnection must be incorporated in
the fixed wiring in accordance with the wiring rules
• Follow the installation section of this manual
for fixing the appliance.
IMPORTANT INFORMATION
Read this instruction manual thoroughly before using the appliance and save it for future
reference and if necessary, pass the instruction manual on to a third party.
• This appliance is intended exclusively for domestic use for the ventilation of rooms:
Do not use it for other purposes. Any other use should be considered improper and
dangerous. The manufacturer shall not be held responsible for any damage resulting
from improper, incorrect and irresponsible use and/or for repairs made by unqualified
technicians.
• Check if the electrical specifications of the appliance are compatible with your installation.
• This appliance is for indoor use only except moist or wet room.
• Before pushing the reversible slide switch, it is necessary to stop the action of the bla-
des by turning off the fan.
• The supplier disclaims all liability for personal injury or property damage arising from
incorrect use or installation of the fan. In doubt, call upon an electrician.
• Be careful when working near the rotating blades.
• Warning: only to be installed outside arms reach.
• The product should be installed by an authorized electrician in accordance to national
wiring rules.
• An all-pole disconnector with isolating distance of 3mm must be incorporated in the
fixed wiring in accordance with the national wiring rules.
• The inner wires can´t touch the white metal enclosure after assembling by the client.
TURN POWER OFF
Begin installation by removing fuses or turning off circuit breakers to the wiring you will
be using.
WARNING: Failure to disconnect the power supply prior to installation may result in se-
rious injury or death.
Install the appliance ONLY for flat ceilings DO NOT use with sloped or vaulted ceilings.
In locations without a ceiling joist, a hanger support bar may be required. Do not install
in damp locations.
B&B TRENDS, S.L. will not be held liable for any harm or damage which may occur to
people, animals or objects as a result of failure to observe the aforementioned warnings.
21