Weber 7670 Manual Del Usuario página 4

Before-You-Grill Checklist
EN
✓ Confirm that you have the
WEBER CRAFTED Grates and
Frame. They can be purchased
separately on weber.com.
✓ Make sure that your Dual-Sided
Sear Grate is clean and ready
to go.
Grilling Instructions
Once the WEBER CRAFTED Grates
and Frame are installed:
1. Remove the cooking grate
(A) and place the Dual-Sided
Sear Grate within the WEBER
CRAFTED Frame (B).*
2. Place Spacer between the Dual-
Sided Sear Grate and front of the
cookbox (C).
3. Preheat your grill for
approximately 10-15 minutes
with Dual-Sided Sear Grate
in place.
4. While the grill is preheating, oil
and season your food according
to its recipe.
5. Add your food and continue with
the recipe.
* For WEBER smart grills, avoid contact
with the temperature probe in the back
of the cookbox.
4
Caring for Your Dual-Sided
Sear Grate
• Use a grill brush to clean before
or after each use.
• The Dual-Sided Sear Grate
is dishwasher safe, however
handwashing using a mild
detergent is recommended to
extend the life of the product.
• Thoroughly dry before storing.
Tips For Deep Cleaning
Over time your Dual-Sided Sear
Grate may build up food residue.
Here is an effective method to
remove it:
1. Remove as much food residue
from the Dual-Sided Sear Grate
as possible.
2. Combine three parts baking
soda with one part water.
A paste will form.
3. Generously apply the paste
to the Dual-Sided Sear Grate.
It should be thick enough to
coat fully.
4. Leave the mixture for a few
hours or overnight. Add more
baking soda and scrub with a
non-abrasive nylon brush or
sponge.
5. Rinse clean and dry.
NOTE: For extra stubborn
residue, pour vinegar over the
paste just before cleaning. Once
the fizzing reaction dies down,
continue to scrub and rinse.
If you have any questions,
contact the Customer Service
Representative in your area using
the contact information on our
website. Log onto weber.com.
A
B
C