Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION INSTRUCTION
1.
Put the air switch to "ON" position, open the valve of argon cylinder and adjust the flow.
Adjust the wire diameter of the wire machine to rated number according to wire diameter.
2.
3.
Choose torch loophole span based on wire diameter.
4. Tune the voltage and speed to the best position based on the thickness of the work piece and mechanics.
Press the torch switch to let out the wire to the torch head and begin to work.
5.
MIG-160A, MIG-180A AND MIG-200A Compact CO2 Welding Machine Facial Sketch：
The panel picture above is for reference only. If any difference with the real machine, please follow with the real
machine.
1
Abnormal indicator
2
Power indicator
3
Wire diameter selection
4
Wire feeding speed adjustment
5
Power switch
6
Positive output terminal
7
Voltage meter
8
Current meter
9
Welding voltage adjustment
10
Negative output terminal
Publicidad
