MADER MIG-200A Manual Del Usuario página 59

18
21 - Wire pull roller
22 – The roller has two lanes,
allowing you to work with two
wires of different diameters. In
this case, 0.8 and 1.0. When
changing the diameter of the
wire, the roller is removed and
placed upside down.
23 - Way to put the wire bobine
for welding
19
20
21
18- Wire reel support to be welded in MIG
function
19- Switch that turns on the motor to pull
the wire to more easily put the wire.
20 - Wire pulling motor in MIG function
2n
d
3r
d
22 22