Publicidad
Idiomas disponibles
Idiomas disponibles
ADDITIONAL MACHINE INVERTER WELDING INSTRUCTIONS 3 IN 1
3-in-1 inverter welding machine, wire welding designated as semi-automatic or MIG-MAG, and
welding with coated electrode designated as MMA.
MIG
(Metal Inert Gas) - Continuous wire welding + inert gas protection
MAG (Metal Active Gas) - Continuous wire welding + active gas protection
MMA (Manual Metal ARC) - Welding with coated electrode
Semi-automatic welding with fluxed wire - this welding, in the fusion of the wire with the part to
be welded, releases the antioxidant gas for the protection of welding, this gas can be active or inert,
depends on the composition of the wire.
7
1
2
5
6
15 - ON/OFF switch
16 - Gas protection input terminal
17 - Cooling fan
Coated electrode | Fluxed Wire | Wire + gas
9
8
10
3
4
1 - A power value display
2 - V voltage value display
3 - Negative exit terminal
4 - Positive output terminal
11
5 - MIG-MAG torch exit terminal
6 - Torch power circuit terminal
12
7 - Inductance adjustment potentiometer in the
MIG process for low amperages
1st
13t
8 - MIG Indicator
h 14
9 - MMA Indicator
10 - High temperature stop indicator
11 - Anomaly indicator
12 - MMA/ MIG Switch
13 - Voltage value adjustment potentiometer
14 - Power value adjustment potentiometer in
Amperes
15
16
17
Publicidad
