Timer
Language
Dimmer
Display
Power Management
Sleep Timer
Buffer
Weather
FM Setup
Local Radio Setup
Playback Setup
Device
Equalizer
Countdown timer (max. 100min)
English/Deutsch/Espanol/Francais/Portugese/Nederlands/Italiano/Pyccknn/
Svenska/Norske/Dansk/Magyar/Cesky/Slovensky/Polski/Turkce/Suomi
Power Saving/Turn On
Color/Monochrome
This option configures when the DIR-170 should go into standby mode. You
can select Turn off/5 minutes/15 minutes/30 minutes.
When configured, the DIR-170 will switch to standby when no music is played
for the configured time.
Use the Turn off setting to ignore the standby function.
Turn off or set the sleep timer of 15/30/60/90/120/150/180 minutes. Once
the time is set, there will be a bed icon with the remaining minutes at the top
right corner of the display and the device will turn to standby after the
configured time.
(You also can use the Sleep button on the remote control to use this function)
Configure the buffer time of the music playback, 2/4/8 seconds.
Activate/deactivate the weather forecast on the standby display. Choose
your preferred temperature unit (°F or °C) and then proceed by entering your
location. When activated, the weather forecast is shown in turns with the
clock display on the standby screen (it changes every 10 secs).
Mode: you can set to forced Mono or Stereo reception.
Treshold: Choose the seek- and Stereo threshold.
There is a shortcut Local Radio from the Internet Radio menu so that you can
easily go to the station list of your location. You can setup your location
manually or let the system detect your current location. If you choose to
automatically detect your location, the system will detect the location
according to the IP address of your connected network. Press Local Station to
enter the local radio station list directly.
Select the play mode of the media center. You can select: Off (no repeat or
shuffle), Repeat all, Repeat one, or Shuffle.
The DIR-170 default device name for DLNA is "AirMusic". You may rename it
for DLNA setup on the PC or mobile. Use the QR code for download and
install the "AirMusic" control App.
The default equalizer setting is 'normal', but you may change it to 'Flat, Jazz,
Rock, Soundtracks, Classical, Pop, News or my EQ'. Press the EQ button on
the remote control to quickly change the equalizer mode.
19