To ensure the designed operational integrity of the device, do not remove factory-installed
g)
covers or loosen screws.
When transporting and moving the device from storage to the place of use, the occupational
h)
health and safety rules for manual transport work applicable in the country where the devices
are used should be taken into account.
Avoid situations where the device stops under heavy load during operation. This may cause
i)
overheating of the drive elements and, consequently, damage to the device.
Do not touch moving parts or accessories unless the device has been disconnected from the
j)
power supply.
It is prohibited to move, rearrange or rotate the device while in operation.
k)
The device should be cleaned regularly to prevent permanent contamination.
l)
The device is not a toy. Cleaning and maintenance must not be performed by children without
m)
adult supervision.
Do not start the device empty.
n)
It is prohibited to interfere with the structure of the device to change its parameters or
o)
structure.
Keep devices away from sources of fire and heat. Do not expose the device to direct sunlight.
p)
Do not cover the ventilation openings of the device!
q)
ATTENTION! During operation, some elements of the device heat up to high temperatures -
r)
there is a risk of burns!
Do not place the device upside down or tilt it at an angle greater than 45°.
s)
Keep a free space around the device (at least 20 cm on each side).
t)
Do not damage the refrigerant circulation system.
u)
ATTENTION! Even though the device has been designed to be safe, has appropriate protective
measures, and despite the use of additional user safety features, there is still a small risk of
accident or injury while working with the device. It is recommended to exercise caution and
common sense when using it.
3. Terms of Use
The machine is designed to produce granita and cold drinks, such as iced coffee, frozen cappuccino, frozen
yogurt, and frozen alcoholic beverages.
The user is responsible for any damage resulting from improper use.
EN