Briggs & Stratton 040336-00 Manual Del Usuario página 27

Menu
The following chart shows the icons for the buttons that control the system control panel.
(nny
ox MENU ENTER THE MENU (VIEW SETTINGS)
PRESS TO CONFIRM SELECTION WHEN PROGRAMMING.
——
x ESCAPE (EXIT) RETURN TO LAST MENU ITEM
<I
RIGHT ARROW TOGGLE THROUGH MENU OPTIONS
> SETTING SYSTEM PARAMETERS
\rereneneneneatl
LEFT ARROW TOGGLE THROUGH MENU OPTIONS
< SETTING SYSTEM PARAMETERS
\ccmmnnnrmnnnnast
(ae
USED TO MANUALLY START THE GENERATOR. PRESS AND HOLD BUTTON
| MANUAL MODE TO START THE GENERATOR.
O OFF TURNS OFE RUNNING GENERATOR, PREVENTS UNIT FROM STARTING, AND
RESETS ANY DETECTED FAULTS.
A
NORMAL OPERATING POSITION. PRESS AND HOLD BUTTON 10 PUT UNIT
oy INTO AUTOMATIC MODE. IF A UTILITY POWER OUTAGE IS SENSED, THE
AUTOMATIC MopE | SYSTEM WILL START THE GENERATOR. WHEN UTILITY POWER IS
RESTORED, AUTO LETS THE ENGINE STABILIZE INTERNAL TEMPERATURES,
SHUTS OFF THE GENERATORyAND WAITS FOR THE NEXT UTILITY POWER
OUTAGE.
The following chart describes key sequences for aecessing different programming modes;
GENERAL PRESS AND HOLD [ARROW LEFT AND ARROW RIGHT] FOR THREE
SET-UP SECONDS TO ENTER THE PROGRAM MODE.
ADVANCED PRESS AND HOLD [ARROW LEFT, ARROW RIGHT AND ESC] FOR
»< > SETTINGS THREE SECONDS TO ENTER THE ADVANCED SETTINGS MODE.
< WIRELESS PRESS AND HOLD [MENU AND ESC] FOR THREE SECONDS TO
LINK MODE ENTER THE WIRELESS LINKING MODE.
27