Bosch UniversalWorkLight 18V-2100 Manual Original página 10

10 | English
Cordless worklight
Recommended battery char-
E)
gers
A) At full brightness (excluding remaining operating time in
dimmed mode)
B) Measured at 20–25 °C with rechargeable battery PBA 18V
2.0Ah
C) Limited performance at temperatures < 0 °C
D) plus batteries and chargers for the POWER FOR ALL system
E) The following chargers are not compatible with the PBA re-
chargeable battery: AL 1814 CV Professional, AL 1820 CV Pro-
fessional, AL 1860 CV Professional, AL 2215 CV Professional
The colour rendition of illuminated objects can be distorted.
Rechargeable battery
Bosch sells some cordless worklights without a re-
chargeable battery. You can tell whether a rechargeable bat-
tery is included with the cordless worklight by looking at the
packaging.
Charging the battery
Use only the chargers listed in the technical data. Only
u
these chargers are matched to the lithium-ion battery of
cordless worklight.
Note: Lithium-ion rechargeable batteries are supplied par-
tially charged according to international transport regula-
tions. To ensure full rechargeable battery capacity, fully
charge the rechargeable battery before using your tool for
the first time.
Inserting the Battery
Push the charged battery into the battery holder until it
clicks into place.
Removing the Battery
To remove the rechargeable battery, press the battery re-
lease button and pull the battery out. Do not use force to do
this.
Battery Charge Indicator on the Cordless
Worklight
The following information is displayed:
LED Meaning
3 × continuous green State of charge ≈ 75–100 %
light
2 × continuous green State of charge ≈ 40–75 %
light
1 × continuous green State of charge ≈ 15–40 %
light
Flashing light outer State of charge ≈ 0–15 %
LED
Flashing light middle Fault in the cordless worklight
LED Contact Bosch customer services.
1 609 92A 9JG | (07.03.2024)
UniversalWorkLight LED
18V-2100
Flashing light all LEDs Battery or cordless worklight out-
D)
AL 18...
Battery Charge Indicator on the Rechargeable
Battery
Note: Not all battery types have a battery charge indicator.
The LEDs on the battery charge indicator on the re-
chargeable battery indicate the state of charge of the bat-
tery. For reasons of safety, it is only possible to query the
state of charge when the cordless worklight is switched off.
Press the button for the battery charge indicator on the re-
chargeable battery to show the state of charge. This is also
possible when the rechargeable battery is removed.
LEDs on rechargeable battery
4 × continuous green light
3 × continuous green light
2 × continuous green light
1 × continuous green light
1 × flashing green light
Recommendations for Optimal Handling of the
Battery
Protect the battery against moisture and water.
Only store the battery within a temperature range of −20 to
50 °C. Do not leave the battery in your car in the summer, for
example.
A significantly reduced operating time after charging indic-
ates that the battery has deteriorated and must be replaced.
Follow the instructions on correct disposal.
Operation
Starting Operation
With the battery inserted, the cordless worklight is ready to
use.
Setting up and adjusting the cordless worklight
(see figures A−B)
Carefully unfold the handle/stand (5) and, if necessary, the
hook (4) and position the cordless worklight. Ensure the
cordless worklight is positioned on a stable surface/object
and is not too close to heat-sensitive or flammable objects.
The lamp head (1) can be turned to different positions
within the handle/stand (5).
Note: The cordless worklight must not be used in the posi-
tion depicted in the figure B. The cordless worklight could
fall down and overheat.
Meaning
side the operating temperature
Allow battery and cordless work-
light to cool down.
State of charge
≈ 75–100 %
≈ 50–75 %
≈ 25–50 %
≈ 5–25 %
≈ 0–5 %
Bosch Power Tools