Publicidad
Idiomas disponibles
Idiomas disponibles
off. This can damage the battery. Ensure that the battery
is charged and that the cordless worklight has cooled
down before switching the cordless worklight on again.
In case of damage and improper use of the battery, va-
u
pours may be emitted. The battery can set alight or ex-
plode. Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
If used incorrectly or if the battery is damaged, flam-
u
mable liquid may be ejected from the battery. Contact
with this liquid should be avoided. If contact accident-
ally occurs, rinse off with water. If the liquid comes
into contact with your eyes, seek additional medical
attention. Liquid ejected from the battery may cause ir-
ritation or burns.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
When the battery is not in use, keep it away from pa-
u
per clips, coins, keys, nails, screws or other small
metal objects that could make a connection from one
terminal to another. A short circuit between the battery
terminals may cause burns or a fire.
Do not open the battery. There is a risk of short-circuit-
u
ing.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Only charge the batteries using chargers recommen-
u
ded by the manufacturer. A charger that is suitable for
one type of battery may pose a fire risk when used with a
different battery.
Only use the battery in the manufacturer's products or
u
in POWER FOR ALL system products. This is the only
way in which you can protect the battery against danger-
ous overload.
Keep the cordless worklight away from im-
plants and other medical devices, e.g. pace-
makers or insulin pumps. The magnet inside
the cordless worklight generates a field that
can impair the function of implants and medical
devices.
Keep the cordless worklight away from magnetic data
u
storage media and magnetically-sensitive devices.
The effect of the magnet can lead to irreversible data loss.
Do not fix the cordless worklight overhead using the
u
magnetic mount. There is a risk of injury if it falls down.
Check to ensure that the magnetic mount can securely
u
hold the cordless worklight. There is a risk of injury if it
falls down.
Avoid dust accumulation at the workplace. Dust can
u
easily ignite.
Bosch Power Tools
Do not allow children to use the cordless worklight.
u
Children can unintentionally blind themselves or other
persons.
Product Description and
Specifications
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The cordless worklight is intended for temporary mobile illu-
mination in confined spaces in domestic settings. The cord-
less worklight must not be left unattended when in opera-
tion. The cordless worklight is not permitted for use in road
traffic.
Product Features
The numbering of the product features refers to the illustra-
tion of the cordless worklight on the graphics page.
(1) Lamp head
(2) Light switch
a)
(3) Rechargeable battery
(4) Hook
(5) Handle/stand
(6) Battery charge indicator on the cordless worklight
a)
(7) Battery release button
(8) Magnet
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Cordless worklight
Article number
Rated voltage
Rated power input
A)B)
Lighting duration, approx.
min/Ah
B)
Total luminous flux, max.
Recommended ambient tem-
perature during charging
Permitted ambient temperat-
C)
ure during operation
and
during storage
Recommended rechargeable
batteries
English | 9
UniversalWorkLight
18V-2100
3 603 JA1 300
V=
18
W
17
70
lm
2100
°C
0 ... +35
°C
–20 ... +40
D)
PBA 18V...W-.
1 609 92A 9JG | (07.03.2024)
Publicidad
