Descargar Imprimir esta página

VEVOR V-0.25/8 Manual Del Usuario página 12

Compresor de aire a gas

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 81
- The valve seat being too hot-check to see if the discharge pipeline is smooth and
clean it
- The valve seat being loose-relock it tightly
- Dirt, rust getting into valve seat-remove and clean
- The valve plate being broken-replace or repair
The Air Compressor cannot revolve
1. When silence
- Stop electricity supply-consult electric power company-The supply wire or fuse
being broken-replace or repair
- The motor being out of work-send to the electro mechanic shop to repair
2. The motor grumbling without start
-The supply wire or fuse being broken-replace a new one-The voltage dropping
low-consult the electric power company for repair
- The discharge valve having leakage-remove the valve and repair
The supply wire being wrong-replace the wire
The motor being out of work-send to the electro mechanic shop for repair.
The motors being over-loading-lower the loading
The crankshaft being too tight-remove and repair
1
2
3
4
5
6
7
8
9
10
11
12
PARTS LIST
Bolt
Spring washer
Shaft end washer
Fly pulley
Bolt
Bearing cover
bearing cover packing
Bearing
Circlet for shaft
Bearing
Crankshaft
Circlet for hoe
- 11 -

Publicidad

loading

Este manual también es adecuado para:

V-0.25/8dW-0.9/8