Publicidad
Idiomas disponibles
Idiomas disponibles
Remove all packaging (see chapter »DISPOSAL«). When removing the packaging, make sure
not to damage the appliance with a sharp object. Keep the packaging material (plastic bags, other
plastic parts etc.) out of reach of children.
Check for any damage on the appliance. If you suspect the appliance is damaged, do not use it
and immediately contact the After-sale Service.
The appliance is supplied with a support set that includes:
Instructions for use;
4 plastic plugs;
Supply hose;
Drain hose holder;
Wrench;
Noise reduction board.
Make sure all parts listed above are supplied.
1. Before installing the noise reduction board,
align and paste the acoustic absorption wool
with and along the right-angle impression on
noise reduction board (this procedure is
unnecessary for some of the models without
acoustic abs orption wool).
3. Incline the machine to an angle of 40° and
let the side with right-angle notch face
towards front of the washing machine, as
shown in the figure. Insert the side with
oblique-angle notch between two foot
screws at back of the washing machine
completely in place. Then, install the noise
reduction board and ensure that it contacts
with bottom of the washing machine closely.
14
Double sided tape
2. Remove surface paper on double sided
tape at four sides of the noise reduction
board.
4. Press the double sided tape on four sides
Pump
manually to secure the noise reduction
board to the machine body firmly.
Publicidad
