Floor on which the washing machine is placed must have a concrete base. It should be clean
and dry; otherwise, the washing machine may slide. Also, clean the bottom surface of adjustable
feet.
The washing machine must stand level and stable on a solid base.
Use a spirit level and the supplied spanner.
Incorrect levelling of the washing machine with the adjustable legs may cause vibration,
appliance sliding across the room, and loud operation. Incorrect levelling of the washing machine is
not subject to warranty.
Sometimes, unusual or louder noise may appear during appliance operation; these are mostly
the result of improper installation.
Rotate the
adjustable feet to
level the washing
machine. The feet
allow levelling by
+/- 2 cm.
After adjusting the
height of the feet,
firmly tighten the jam
nuts (counter nuts) by
turning them towards
the bottom of the
washing machine
using the supplied
spanner
(see
figure).
17