Danby DDR022BSWDB Manual De Conexión página 3

OPERATING INSTRUCTIONS
CREATE ACCOUNT
When you open the app for the first time, you will be asked to read and agree with the Data Privacy
Notice.
1. Press "Create Account" or press "Sign in
with a third party account."
Android
NETWORK CONFIGURATION
• It may be helpful to remove unused wireless networks from your device memory to make sure you are
connecting to the correct network.
• Make sure the wireless device and network are working properly before beginning to connect the
wireless appliance. You must finish all the steps for connection within 8 minutes of entering AP mode or
the connection will reset and you will need to activate AP mode again to restart the connection.
• There are two ways to connect the wireless feature, by Bluetooth connection or by manual selection. We
recommend using the Bluetooth connection as it is easy and fast and will save you time. If the Bluetooth
connection does not work, follow the steps for manual connection.
To begin the connection process, plug in the appliance and then press and hold the Power button on the
control panel for 3 seconds. "AP" will show on the display. This stands for "Access Point" and means that
AP mode is activated and the wireless receiver in the appliance is ready to make a connection.
2. Enter your email address and password and
Apple iOS
3
then press, "Register".