Dometic ACC3100 Instrucciones De Montaje página 11

Installing the roof top unit
1. Only for version 1: Remove the center ring on the roof top unit.

1.
2. Seal around the roof frame with flexible non-hardening butyl sealing compound (e.g. SikaLastomer-710, Selleys
Butyl Mastic, Bostik ezycaulk butyl sealant, or similar products). Observe the sealant manufacturer's instructions.
3. Li the roof top unit onto the roof of the vehicle. Observe the direction of travel.
4. Position the roof top unit centrally on the roof of the vehicle.
5. Remove the cable tie on the rooop unit and lead the cables through the corresponding opening into interior of
the vehicle.
2 .
400 x 400 mm
355 x 355 mm
EN
11