Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
4. Operation
Control Panel Operation
The Net-X II is configured through the control panel, using the control knob. Once the Net-X II is properly
configured it operates without user intervention.
The Net-X II can be used as a DMX splitter, in which case the DMX In ports must be assigned to the DMX
output/input ports, but the Net, Subnet, and IP address settings may not need configuration.
The Net-X II can be used as an Art-Net™ node, in which case the Art-Net™ universes must be assigned to
the DMX output/input ports, and the Net, Subnet, and IP address settings must be configured.
The Net-X II can be used as an sACN node, in which case the sACN universes must be assigned to the
DMX output/input ports, and the IP address settings must be configured.
The Net-X II can be used as both a DMX splitter and either an Art-Net™ or sACN node simultaneously, in
which case both the DMX assignments and the Art-Net™ or sACN settings must be configured.
The Net-X II can be used to merge two DMX, Art-Net™, or sACN signals from different controllers and
output as one signal, using LTP (latest takes precedence) and HTP (highest takes precedence) functions.
The Net-X II has backup settings and configurations with same or other Net-X II products.
The Net-X II is Web server supported for remote configuration and backup/update.
The Net-X II's record function allows you to record looks from a controller and save them into memory.
These can be deployed via the Phoenix triggers.
Control Knob
The Net-X II has a knob that is used to scroll through the options in the menu. Press the knob to make a selection.
Programming
Refer to the Menu Map to understand the menu options. The menu map shows the main level and a
variable number of programming levels for each option.
•
To access the menu from the Home Screen, press the knob.
•
To scroll through the options on each level of the menu, turn the knob. Turn it clockwise to scroll
down, and turn it counter-clockwise to scroll up.
•
Press the knob to select the highlighted option. This will take you to the next programming level for
that option, or it will highlight a value that can be edited.
•
To increase a selected number value, turn the knob clockwise. To decrease a selected number
value, turn the knob counter-clockwise.
•
Press Exit/Cancel to the previous main level.
•
Press the knob for 3 seconds to return to the Home Screen.
8
Operation
Net-X II User Manual Rev. 6
Publicidad
Tabla de contenido
