Chauvet Professional NET-X II Manual De Usuario página 20

M L
AIN EVEL
DMX Ports 1–8 /
DMX Input A–B
(Inputs A and B
7. Set DMX
only when
Port
Operating Mode
is set to
2 + 8 Port)
8. LCD
Backlight
9. User
Preset
10. Factory
Reset
10
P L
ROGRAMMING EVELS
1. Disp Type
2. DMX Status
3. DMX Mode
(INPUT Status
(INPUT Status
4. Protocol
5. Framerte/fs
00H–7FH (Hex)
6. Network
000–128 (Dec)
00H–FFH (Hex)
7. 1st Universe
000–256 (Dec)
8. Exit (Option 8 for Input Status or
Output Status in Single Mode)
1. On
2. 10 Seconds
3. 30 Seconds
4. Exit
1. Art-net 8-port DMX
2. sACN to 8-port DMX
3. 1x8 DMX Splitter
4. 2x4 DMX Splitter
5. Exit
NO
YES
D
ESCRIPTION
HEX Hexadecimal values
DEC Decimal values
OUTPUT Sets the port as output
Sets the port to receive DMX from
INPUT a controller that can be routed to
another DMX port
DISABLE Disables the output port
SINGLE
(OUTPUT Disables Ethernet signal merging
Status only)
LTP
Sets Ethernet signal merging to
(OUTPUT
Latest Takes Precedence
Status only)
HTP
Sets Ethernet signal merging to
(OUTPUT
Highest Takes Precendence
Status only)
NORMAL
Sets input ports acting as a primary
controller
only)
BACKUP
Sets input ports acting as a backup
controller
only)
Sets the output/input source for the
ArtNet
DMX port to Art-Net™
Sets the output/input source for the
sACN
DMX port to sACN
010–040 Sets rate of speed for output ports
Sets the net settings
Sets the primary input/output
universe
Exits to the previous screen
Backlight on
Display turns off after 10 seconds
Display turns off after 30 seconds
Exits to the previous screen
Sets all 8 ports to receive 8
universes of Art-Net™ from 0–7
Sets all 8 ports to receive 8
universes of sACN from 1–8
Sets the product to operate as a
DMX splitter with all 8 outputs
receiving DMX from input A
Sets 1–4 outputs to input-port A
and the 5–8 outputs to input-port B
Exits to previous screen
Resets to factory settings
Net-X II User Manual Rev. 6
Operation