Technical Data; Machine Components; Intended Use; For Your Safety - Bosch GDC 14-40 Manual De Instrucciones

Technical data

Diamond cutter
Part number
Rated power [W]
127 V
Amperage [A]
220 V
No-load speed [min ]
–1
Diamond cutting discs Ø [mm]
Mounting hole [mm]
Cutting depth max 0° [mm]
Cutting depth max 45° [mm]
Footplate [mm]
Weight (without optional extras) approx. [kg]
Safety class

Machine components

1
Protective guard
2
On/Off switch
3
Lock button
4
Handle
5
Ventilation slots
6
Base plate
7
Tap
8
Cutting line mark, 0 °
9
Motor spindle
10
Mounting flange
11
Diamond cutting disc (optional accessory*)
12
Flange
13
Screw
14
Allen wrench – 5 mm
15
Open-ended spanner
16
Hose adapter
17
Hose
18
Screw for cutting depth setting
19
Cutting depth scale
20
Screw for cutting angle setting
21
Cutting angle scale
* Not all of the accessories illustrated or described are in-
cluded standard delivery.
Noise vibration
Measured values determined according to IEC 60745.
The A-weighted noise levels of the machine are typical-
ly: sound pressure level: 86 dB (A); sound power level: 99
dB (A).
Wear ear protection!
The weighted acceleration is typically 5.0 m/s
Disco 110 mm
Disco 125 mm
Disco 110 mm
Disco 125 mm

Intended use

The machine is designed for horizontal cuts mainly for min-
eral material, e. g. marble, using the base plate and posi-
tioned on a fixed base, both for wet cutting.
Attention!
It is prohibited to use the machine for works overhead.
This machine is not indicated for cuts in wood, plastic and
metallic materials.

For your safety

strictly followed. In addition, the general safety
instructions on page 14 must be followed. Before
using the tool for the first time, ask for a practical
demonstration.
• Never allow children to use the machine.
• When working with the machine, always hold it firmly
with both hands and provide for a secure stance.
• Always direct the cable to the rear away from the ma-
chine.
• Apply the machine to the workpiece only when switched
on.
.
2
• Always switch off the machine and wait until it comes; to
a standstill before placing it down.
GDC 14-40
0 601 548..
1400
11,0
6,4
12000
125
20
33,5
41,0
21,3
26,5
98,3 x 174,6
2,6
/ II
Working safety with this machine is pos-
sible only when the operating and safe-
ty information are read completely and
the instructions contained therein are
• If the electric cable is damaged or cut through
while working, do not touch the cable but imme-
diately pull the mains plug. Never use the ma-
chine with a damaged cable.
• Wear protective goggles, ear protection and
dust protection mask.
• Wear protective gloves and sturdy shoes.
• When necessary, also wear an apron.
7