Analog Radio - Kenwood KDC-BT48DAB Manual De Instrucciones

ASW SELECT TRAVEL, WARNINGS, NEWS, WEATHER, EVENT, SPECIAL, RAD INFO, SPORTS,
FINANCE: Turn the volume knob to make a selection, then press the knob.
" * " appears in front of the activated announcement type.
Automatically switch from any source to Digital radio ensembles broadcasting an
activated announcement type.
• Multiple announcement can be activated simultaneously.
• To deactivate, press the volume knob again ("
LIST UPDATE AUTO: Automatically update the DAB Service List when the power is turned on. ;
MANUAL: Updates the DAB Service List by pressing and holding
PTY WATCH Automatically switch from any source to Digital Radio ensembles broadcasting a
selected type of program.
NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE, SCIENCE,
VARIED, POP M (music), ROCK M (music), EASY M (music), LIGHT M (music),
CLASSICS, OTHER M (music), WEATHER, FINANCE, CHILDREN, SOCIAL,
RELIGION, PHONE IN, TRAVEL, LEISURE, JAZZ, COUNTRY, NATION M (music),
OLDIES, FOLK M (music), DOCUMENT
OFF: Cancels.
CLOCK
TIME SYNC ON: Synchronizes the unit's time to the Digital Radio signal station time. ;
OFF: Cancels.
• Available Program Type:
SPEECH: NEWS, AFFAIRS, INFO (information), SPORT, EDUCATE, DRAMA, CULTURE,
SCIENCE, VARIED, WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE IN, TRAVEL,
LEISURE, DOCUMENT
MUSIC: POP M (music), ROCK M (music), EASY M (music), LIGHT M (music), CLASSICS,
OTHER M (music), JAZZ, COUNTRY, NATION M (music), OLDIES, FOLK M (music)
The unit will search for the Program Type categorized under [SPEECH] or [MUSIC]
if selected.
• If the volume is adjusted during reception of traffic information,
announcement or alarm, the adjusted volume is memorized automatically.
It will be applied the next time traffic information, announcement or alarm
function is turned on.
DIGITAL RADIO (DAB)
* " goes off).
.

ANALOG RADIO

Search for a station
1 Press B SRC to select TUNER.
2 Press J BAND repeatedly (or press
to select FM1/ FM2/ FM3/ MW (or LW).
3 Press S / T (or press S / T (+) on RC-406) to search
for a station.
• To change the searching method for S / T: Press K SEEK
repeatedly.
AUTO1: Automatically search for a station.
AUTO2: Search for a preset station.
MANUAL: Manually search for a station.
• To store a station: Press and hold one of the number buttons
(1 to 6).
• To select a stored station: Press one of the number buttons
(1 to 6) (or press one of the number buttons (1 to 6) on RC-406).
Direct Access Tuning (using RC-406)
1
Press DIRECT to enter Direct Access Tuning.
2 Press the number buttons to enter a frequency.
3
Press ENT IW to search for a station.
• To cancel, press or DIRECT.
• If no operation is done for 10 seconds after step
Tuning is automatically canceled.
AM– / #FM+ on RC-406)
*
2
, Direct Access
ENGLISH | 7