Wiring Connection - Kenwood KDC-BT48DAB Manual De Instrucciones

Wiring connection

Antenna terminal
DAB antenna jack ( 25)
Connecting the ISO connectors on some VW/
Audi or Opel (Vauxhall) automobiles
You may need to modify the wiring of the
supplied wiring harness as illustrated below.
A7 (Red)
Vehicle
A4 (Yellow)
Default wiring
Pin Color and function
A4 Yellow : Battery
A5 Blue/White : Power control
A7 Red : Ignition (ACC)
A8 Black : Earth (ground) connection
B1 Purple ]
: Rear speaker (right)
B2 Purple/black [
B3 Gray ]
: Front speaker (right)
B4 Gray/black [
B5 White ]
: Front speaker (left)
B6 White/black [
B7 Green ]
: Rear speaker (left)
B8 Green/black [
24
Rear/subwoofer output
Yellow (Battery wire)
Red (Ignition wire)
Ignition wire
(Red)
Unit
Battery wire
Red (A7)
(Yellow)
Yellow (A4)
ISO connectors
MIC (Microphone input terminal) ( 12)
USB cable
Fuse (10 A)
If no connections are made, do not let the wire
come out from the tab.
STEERING WHEEL
Light blue/yellow
To the steering wheel remote
REMOTE INPUT
control adapter
(Steering remote
REMOTE CONT
control wire)
To the power control terminal
ANT . CONT
Blue/White
when using the optional power
amplifier, or to the antenna
(Power control wire/
P. CONT
control terminal in the vehicle.
Antenna control wire)
To connect the Kenwood
Brown
navigation system, consult your
(Mute control wire)
MUTE
navigation manual.
Part list for
installation
(A) Faceplate
(B) Trim plate
(C) Mounting sleeve
(D) Wiring harness
(E) Extraction key