∙ Before the grill is used, always check
that the fat collection tray is correctly
fitted in the barbecue grill.
∙ The barbecue grill must be supervised
at all times during operation.
∙ Do not allow the power cord to touch
any hot parts of the appliance.
∙ Always remove the plug from the wall
socket
- after use,
- in case of any malfunction, and
- during cleaning.
∙ When removing the plug from the wall
socket, never pull on the power cord;
always grip the plug itself.
∙ The use of an extension-lead reel
causes a loss of power, possibly
combined with a subsequent heat build-
up in the cable. It is therefore necessary
to unwind the cable completely from the
reel. A reel may be used in a protected
outdoor area, but it must be of a type
approved for this purpose.
∙ Caution: Do not move the grill when it
is in use. Before carrying, transporting
or storing the grill, ensure that is has
sufficiently cooled down.
∙ Ensure that the grill is not stored
outdoors, or in any other location where
it might be subjected to extremes of
temperature or high humidity.
∙ No responsibility is accepted if damage
results from improper use, or if these
instructions are not complied with.
∙ This product complies with all binding
CE labelling directives.
14
Overview and parts included
1.
Fat collection tray
2.
Power cord with plug
3.
Wind-guard
4.
Grill plate
5.
Grip recesses
6.
Thermostat control with indicator light
Art. no. 8533:
7.
Main unit with base stand
8.
Positioning guides on base stand
9.
Holding bracket for main unit
10. Storage tray
11. Support leg
No illustration
12. 8 bolts
13. 8 wing nuts
Before using for the first time
∙ Remove any packaging materials and
stickers from the appliance and grill
plate; however, do not remove the
symbol on the wind-guard.
∙ Clean the grill plate with warm soapy
water and dry thoroughly.
∙ Wipe all other parts with a damp cloth
and dry thoroughly.
Grill assembly
∙ Prior to assembly, check that all parts
are complete in accordance with the
section Overview and parts included.