5.2.5 Skin zone timer
When you switch on the facial brush, it works for three
periods of 20 seconds. Between these periods, there is
a short pause to indicate you should move the brush
head to another skin zone.
5.2.6 Auto shut-off
The facial brush automatically switches off after one
minute to prevent overtreatment.
5.3 Using the Deep Pore brush head
Note:
D
You can use the Deep Pore brush head twice a day.
Push the brush head onto the connection pin until it
1
locks into position with a click (fig. 8).
Moisten your skin and the brush head with water.
2
Apply the liquid cleanser to your face or the brush
head directly. Do not use the facial brush with a dry
brush head, as this can irritate the skin.
Place the brush head on your skin.
3
Press the on/off button once to switch on the facial
4
brush. Press two times to switch off the facial brush
or wait until it stops automatically after one minute
(fig. 9).
Gently move the brush head across your skin while
5
making horizontal movements. Do not press the
brush head too hard onto the skin to make sure the
treatment remains comfortable (fig. 10).
13