Before Installing Your Dishwasher; Installation Instructions; Connecting To The Mains Water Supply - Proline SDW 499 WH Manual De Instrucciones

 Other indicator lights:
Refill rinse aid
Refill salt
P
3. Programme button
4. Half load function button
5. Delayed start button
6. Start/Pause button
7. Child lock function
 Press two buttons (
function.

BEFORE INSTALLING YOUR DISHWASHER

Before connecting your dishwasher to the power supply, check that the voltage
stated on the rating label of your appliance corresponds to the voltage in your home.
The appliance must be grounded. The manufacturer is not responsible for damages
that may occur as a result of usage without grounding.
WARNING: Disconnect electrical power before installing your dishwasher.

INSTALLATION INSTRUCTIONS

Your dishwasher can be installed in various locations in your kitchen as long as there is
space and accessibility to connect your dishwasher to the water/drainage and electrical
supply.
Do not connect an extension lead to the appliance to avoid potential safety hazards.

Connecting to the Mains Water Supply

Inlet hose (Cold water supply)
Half load function
Child lock
+ ) simultaneously to activate or deactivate this
The water inlet hose from the machine terminates in a 3/4" female
connector. The water supply should therefore terminate in a similar
male connector and should have a stopcock close by in the pipe.
7