Starting The Dishwasher - Proline SDW 499 WH Manual De Instrucciones

Starting the Dishwasher

1. Turn the water tap on.
2. Open the dishwasher door.
3. Check the filters.
 Ensure they are clean and properly positioned. See "Cleaning and
maintenance" section.
4. Check that there is rinse aid and salt.
5. Load the dishes.
 Ensure that the spray arms can rotate freely.
6. Add the required amount of detergent into the dispenser according to the
"Washing Programmes" chart.
7. Close the dishwasher door securely.
8. Press to switch on the dishwasher.
 The ECO programme indicator light will illuminate and the display will show the
washing time.
9. Select the desired washing programme by repeatedly pressing
 The corresponding washing programme indicator light will illuminate.
Intensive
Glass
 Delay timer: The delay timer allows you to delay the start of a washing
programme from 1 hour to a maximum of 24 hours.
Repeatedly press
display, e.g.
H:03 for a 3-hour delay.
Once the delay timer has been set, press
To cancel the delayed start, first press
the display shows "H:00".
10. If you want to perform a half load wash, press
indicator light will illuminate.
 This function can only be used with the Intensive, Normal, Eco wash, Glass and
90-minute programmes .
 When this function is activated, the dishwasher will automatically reduce the
water and energy consumption and the washing time.
Normal
90 minutes
until the desired start delay time is shown on the
then repeatedly press
P
.
Eco
Eco wash
Rapid
to activate the function.
and the corresponding
until
1 7