Using The Rinse Aid And Detergent Dispensers - Proline SDW 499 WH Manual De Instrucciones

Using the Rinse Aid and Detergent Dispensers

The rinse aid helps the dishes dry faster and
prevents the formation of scale deposits and
staining. It is automatically added to the water
during the final rinse cycle.
The detergent and rinse aid dispensers are
located on the inner part of the door: the
detergent dispenser is on the left, and the
rinse aid dispenser is on the right.
Adding the rinse aid
Rotate the dispenser cap anticlockwise and remove it.
Add the rinse aid until the container is full.
 The optical level indicator on the side of the cap should be completely dark.
Replace the cap and turn it clockwise.
NOTE: Refill the rinse aid when the optical level indicator becomes clear again, or
when the rinse aid indicator light illuminates.
Adjusting the rinse aid dispenser setting
The factory setting for the dishwasher is 5 and you can choose among 6 settings.
The amount of rinse aid dispensed is proportional to the selector position.
1. To adjust the rinse aid setting, remove the dispenser cap.
2. Use a screwdriver (not supplied) to rotate the rinse aid
selector to the desired position.
3. Replace the cap and turn it clockwise.
NOTE: The amount of rinse aid must be increased if the
washed dishes appear dull or feature circular stains. If
the dishes are sticky or have white streaks, it is
necessary to reduce the rinse aid setting.
14