Timex Intelligent Quartz W273 Manual De Uso página 36

To turn the altimeter off with the current unit set to
FEET, press C. To turn the altimeter off with the unit set
to METERS, press C twice (lower hand goes to FEET first
before going to the OFF position).
The watch will automatically turn the altimeter off
60 minutes after activation.
ALTIMETER MIN/MAX ALTITUDE RECALL
To view the maximum recorded altitude, press A. The
lower retrograde hand shows the unit of measure that
the maximum altitude was recorded in if the altimeter
was OFF at the moment of button press, otherwise
it will show the maximum altitude using the current
selected unit. The 4th center hand shows the maximum
altitude's hundreds and tens value with divisions every
ten METERS/FEET. The upper retrograde hand shows the
66
maximum altitude's thousands value with divisions every
one thousand METERS/FEET.
The maximum recorded altitude is displayed for ten
seconds. To extend the display duration for another ten
seconds, press A before the previous ten second duration
expires.
To change the unit from METERS to FEET or FEET to
METERS, press C.
To view the minimum recorded altitude, press B. The
lower retrograde hand shows the unit of measure that
the minimum altitude was recorded in if the altimeter
was OFF at the moment of button press, otherwise
it will show the minimum altitude using the current
selected unit. The 4th center hand shows the minimum
altitude's hundreds and tens value with divisions every
67