SEVERIN HM 3810 Instrucciones De Uso página 10

∙ For stirring and kneading, it is best to use
settings 3, 4 or 5.
Turbo function
Maximum speed may be obtained by
pressing down the turbo button, regardless
of the speed level selected.
Selecting the attachments
Beaters
Suitable for light and liquid mixtures such as
crèmes, mixing dough, mashed potatoes,
egg white or cream etc.
Dough hooks
For heavy, kneading-type dough, the dough
hooks must be used.
Fitting the attachments
∙ The hook with the integrated plate must
be inserted into the larger opening
( ).
∙ The beater attachment or kneading hook
with the integrated geared ring fi ts into
the smaller opening with the star-shaped
projection on the blender.
Operation
∙ Insert the selected attachments into the
openings on the underside of the mixer
and push them gently upwards until they
lock into place.
∙ Depending on the quantity of ingredients,
use a suffi ciently deep bowl.
∙ Any bowl, round container or glass is
suitable, provided it is scratch-proof and
the attachments can rotate freely inside.
∙ Once the attachments are fi tted, take the
blender into your hand and position the
attachments inside the container fi lled with
10
the ingredients.
∙ Use your thumb to operate the switches.
∙ Once processing is fi nished, or if you wish
to interrupt the operation, switch off fi rst
before lifting the attachments out of the
mixture.
Ejecting the attachments
The beaters or dough hooks are
automatically detached when the eject
button is pressed.
Using the rotating blender bowl
∙ Push the locking button for the tilt arm
lightly down and pull the tilt arm all the
way back and up.
∙ Place the blender bowl onto the
integrated turntable base.
∙ Fit the beater attachments into the
corresponding openings on the blender
unit until they are properly locked.
∙ Push the Hand blender arrest button (4)
and, at the same time, attach the blender
to the tilt arm and push gently down.
∙ Push the locking button for the tilt arm
(8) slightly in and bring the tilt arm with
the blender into its horizontal operating
position.
∙ Insert the plug into a wall outlet.
∙ Put the ingredients into the bowl and
select the required power setting.
∙ After use, remove the plug from the wall
outlet.
∙ Push the locking button down and pull the
tilt arm all the way back and up.
∙ To remove the blender unit, push the
blender arrest in and pull the blender off.
∙ Remove the blender bowl from the base.
∙ When processing smaller quantities, or for
whipping cream, it may be better to use
a different, more suitable bowl instead of