SEVERIN MW 7803 Instrucciones De Uso página 25

A-5
Pizza
A-6
Cake
A-7
Noodles / pasta
A-8
Chicken/poultry
A-9
Vegetables
A-10
Potatoes
Setting multiple programmes
The unit may be set for a maximum of 3 programmes running consecutively, e.g. defrosting, followed by microwave and then hot-air
cooking. Any defrosting, microwave, grill or hot-air programmes as well as the combination of the programmes may be selected. Any
defrosting programme must of course run before any cooking programme can be started.
Example: To defrost food before it is cooked, fi rst with the microwave function and then with the hot-air function.
1. Programme the defrost function (without pressing
2. Programme the microwave function (without pressing
3. Programme the hot-air function.
4. Press . The display shows the appropriate symbols for the selected programmes.
5 beeps indicate that the entire programme has fi nished.
Hint: This memory function is especially helpful when using the microwave to cook food at different power settings. While a higher
power setting is selected initially, the power can be reduced at a later stage in order to keep the food hot, and to ensure that
the heat is evenly distributed when the food is already done.
Timer
The microwave can be pre-programmed in such a way that it starts operating at a pre-determined time. However, always check fi rst
that the time on the unit has been correctly set prior to using the timer delay function.
1. Set the time (see Setting the clock).
2. Set the desired programme. The unit allows you to set 3 programmes; however, none of the defrosting programmes can be
selected with the timer delay. Do not press the
3. Press . The current time is displayed and the hour display fl ashes.
4. Use the keys and
operating.
5. Press . The minute display fl ashes.
6. Use the keys and
7. Press . The selected programme will start at the pre-programmed time, when 2 acoustic signals will be heard.
50 g (with cold w ater 450 g)
100 g (with cold water 800 g)
150 g (with cold water 1200 g)
key yet.
to select the desired hour setting (between 0-23 resp. 1-12) at which you want the unit to start
to select the desired minute setting (between 0-59) at which you want the unit to start operating.
200 g
300 g
400 g
475 g
500 g
750 g
1000 g
1200 g
150 g
350 g
500 g
230 g
460 g
690 g
)
).
200
300
400
475
50
100
150
500
750
1000
1200
150
350
500
1
2
3
25