Panel & Remote Control Description; Front Panel Description; Rear Panel Description - FTE univers U4128 Manual De Usuario

PANEL & REMOTE CONTROL DESCRIPTION
1. PANEL & REMOTE CONTROL DESCRIPTION

1.1. FRONT PANEL DESCRIPTION

2 3 4 5
1
1. POWER: Switches the receiver on, or enters standby mode.
2. LOCK LED: Indicates a suffi cient signal level at the IF IN input.
3. POWER LED: Indicates that the mains voltage (230 VAC) is available.
4. IR-SENSOR: Reception sensor for the IR remote control signals.
5. CH+/-: These buttons allow changing the current channel.

1.2. REAR PANEL DESCRIPTION

3
1 2
1. IF IN: Satellite input. LNB load: Max. 300mA
2. TV SCART: Output SCART for the connection to a TV set.
3. AC IN: Mains input cable.
PAG. 13