Satellite Guide; Unicable Configuration - FTE univers U4128 Manual De Usuario

OSD 55
OSD 56
OSD 57
OSD 58
OSD 59
INSTALLATION

4.6. SATELLITE GUIDE

When you enter "Satellite Guide" menu, you will see the screen
like beside (OSD 57).
Here you can enter your local longitude and latitude and the
satellite's longitude. The receiver calculates the antenna's
azimuth and elevation to point your antenna to the selected
satellite.
1. Use the [Number] buttons to input the values of "Local
Longitude", "Local Latitude" and "Satellite Longitude".
2. Press [ ]buttons to select east or west in "Local
Longitude" and "Satellite Longitude" or to select north or south
in "Local Latitude".
3. Highlight the "Start" item and press [OK]. In the lower part
of the window the corresponding values for the antenna setting
are displayed (OSD 58).
4. Orientation means the angle between south and satellite.
5. Press [Exit] to leave this feature

4.7 UNICABLE CONFIGURATION

If you have an Unicable installation that allows you to distribute
a satellite signal through a unique cable up to 8 receivers as
maximum, in this menu option you can confi gure the receiver
(OSD 59). There are two ways of doing it:
1. Automatic Confi guration.
automatically the frequency that every receiver uses to work.
2. Manual Confi guration: Press [OK] to check the options:
- FI Channel: select with [
from 1 to 8.
- FI Frequency: With [
frequency.
Each receiver of the Unicable system must have a channel and
frequency different from the rest.
PAG. 28
Unicable system assigns
] keys the numbers
] keys choose the