Standby; Ttx; Mute; Channel Number - FTE univers U4128 Manual De Usuario

OSD 1
OSD 2
OSD 3
BASIC OPERATIONS

2.1. STANDBY

1. Press [Power] button to switch from TV mode to Standby
mode.
2. In Standby mode press [Power] button again to switch back
to TV mode. The last active channel will be showed.

2.2. TTX

1. Press [TXT] button in TV mode to open the teletext page
(OSD 1). This service is depending on the support of the
channel provider.
2. If the channel does not support teletext information, it will
show "No Teletext Data" on the screen.

2.3. MUTE

1. Press the [Mute] button to mute the sound. On the screen an
icon will be displayed to indicate the muted sound (OSD 2).
2. Press the [Mute] button again to restore the sound.

2.4. CHANNEL NUMBER

In TV mode you can enter the channel number directly with your
remote control unit and confi rm the number with the OK button
to change to the desired channel.

2.5. MULTI-PICTURES

In TV mode, press [0] button to enter the Multi-Picture mode
(OSD 3).
1. In Multi-Picture mode the screen will display 9 channels'
preview window (static), starting from the current channel. Only
the marked preview program is continuously playing.
2. Press [
the preview programs.
3. With the number buttons [1] ~ [9] you can directly move the
highlight to the related channel.
4. With [OK] you return to full screen mode in the marked
channel.

2.6. CH +/ CH -

In TV mode press [CH+/CH-] to change channel.

2.7. TV/RADIO

In TV mode, press [TV/R] to switch to Radio mode. In Radio
mode press [TV/R] again to switch back to TV mode.

2.8. VOL+/VOL-

In TV mode, press [Vol+/Vol-] to adjust volume.
PAG. 15
] to change the marked channel among