Specifications; Nail Selection - Metabo HPT NT 50AE2 S Instrucciones Y Manual De Seguridad

English

SPECIFICATIONS

Model
Operating pressure
Dimensions
Length × Height × Width
Weight
Nail capacity
Air consumption

NAIL SELECTION

Be sure to use only the genuine metabo HPT nails for the NT50AE2 (S), NT32AE2 (S). The use of any other
nails can result in tool malfunction and/or nail breakdown, leading to serious injuries.
Only nails shown in the Table below can be driven with this Nailer.
18 Gauge brad nails
10
000Book_NT50AE2_US.indb 10 000Book_NT50AE2_US.indb 10
NT50AE2 (S)
70 – 120 psi (4.9 – 8.3 bar, 5 – 8.5 kgf/cm
10" × 9-3/16" × 2-3/8"
(254 mm × 233 mm × 60 mm)
2.2 lbs. (1.0 kg)
.025 ft
(.73 ltr/cycle at 6.9 bar)
(.73 ltr/cycle at 7 kgf/cm
WARNING
Dimensions of nails
Min.
NT50AE2 (S) • NT32AE2 (S)
.075" (1.9 mm)
.039" .049"
(1 mm) (1.25 mm)
NT32AE2 (S)
)
2
10" × 7-3/4" × 2-3/8"
(254 mm × 197 mm × 60 mm)
2.0 lbs. (.9 kg)
100 Nails
/cycle at 100 psi
3
)
2
Max.
NT50AE2 (S) NT32AE2 (S)
2018/03/22 15:09:04 2018/03/22 15:09:04