MC 120
Repair on the product should
only be carried out by a
specialist.
Direction for use
With the appliance plugged
in to the socket (6) of the
timer, it can be continuously
switched on (I) or set to the
countdown function ( ) by sliding the switch (4) on
the side of the rotary dial (1). The function indicator
light (5) illuminates when the plugged-in appliance is
turned on.
In the countdown mode ( ) turn the rotary dial with
the imprinted minute indices (2) clockwise until the
arrow (3) in the inside ring points to the desired
time. The plugged-in appliance will be turned on
automatically and the indicator light (5) illuminates.
Note: The timer works only if the product is connected
to the mains. Please ensure that the power plug (7) is
properly attached to an active wall socket. When the
preset duration elapses, the plugged-in appliance as
well as the Countdown Timer will be turned off with a
Operating instructions
GB
1
2
3
4
5
6
7
9