SEVERIN KM 3907 Instrucciones De Uso página 13

Operation settings
– Always start processing at speed level
1 and gradually increase the speed as
necessary.
– When making mayonnaise, a higher
setting is recommended.
– Caution: Do not use the beater insert
for preparing dough or similar viscous
substances.
D. Slicing and shredding/grating
– Place the safety lid on the blender
mounting and lock it by turning anti-
clockwise.
– Fit the required insert to the blade
mounting.
– When properly inserted, the slicing or
shredding insert must be fl ush with the
surface of the disc.
– Attach the bowl and fi t the blade mounting
to the drive shaft .
– Place the lid on the bowl and turn it
anti-clockwise to lock; the arrow-mark
on the lid must be aligned with the
corresponding dot on the housing.
– For safety reasons, use the appropriate
pestle at all times when feeding the
ingredients down the food chute. During
operation, the pestle should remain
inserted.
– Always switch the appliance on before
feeding the ingredients down the food
chute.
– Do not put in more than 1 kg of food.
When processing larger quantities, the
bowl must be emptied from time to time.
Functions and operation settings
Shredding
Function
insert
Shredder, fi ne grating/shredding
fi ne (A) (e.g. cabbage, carrots, celery)
Shredder, coarse grating/shredding
coarse (B) (e.g. kohlrabi, salsifi es)
Slicer, cutting thicker slices (e.g.
thick (C) cucumber, carrots, potatoes)
Slicer, thin
(D)
Potato
grater (E)
Cutter for
French
fries (F)
Note: to facilitate choosing the appropriate
attachment,
markings on the cutting and grating inserts
are also included in the table.
E. Citrus juicer
– Place the safety lid on the blender
mounting and lock it by turning anti-
clockwise.
– Fit the bowl.
– Place the pulp sieve on the bowl and lock
it by turning the sieve anti-clockwise.
– Fit the juicer dome to the drive shaft .
– Th e system allows up to 1 litre of juice to
be extracted from the fruit (washed and
cut in half) before it is necessary to empty
the bowl.
– However, when processing such large
quantities of fruit the fi lter must be
emptied from time to time.
Operation setting
– Set the speed control to Min.
F. Juice extractor
– Place the safety lid on the blender
mounting and lock it by turning anti-
clockwise.
– Attach the bowl and fi t the 2-part fi lter
basket to the drive shaft . Ensure that the
Speed
upper part of the fi lter basket is securely
connected to the lower part.
– Place the juicer lid on the bowl and turn
4 - 6
it anti-clockwise to lock;
mark on the lid must be aligned with the
4 - 6
corresponding dot on the housing.
– For safety reasons, use the appropriate
pestle at all times when feeding the
4 - 6
ingredients down the food chute. During
13
cutting thinner slices e.g.
vegetable slices, potato crisps)
grating potatoes (e.g. for potato
pancakes)
cutting French fries
the corresponding
4 - 6
4 - 6
4 - 6
letter
the arrow-