2.4
Mounting or removing of the footrests
L
WARNING:
Risk of injury – Check that the footrests are securely locked in
place before use.
L
CAUTION:
Risk of clamping – Keep objects and people away from the footrests
swing range.
2.5
Folding / Unfolding the backrest
L
WARNING:
Risk of injury – Check that the backrest is securely locked in place
before use.
The mounting of the footrest is done as
follows:
1.
Hold the footrest sideways at the outside
of the wheelchairs frame and mount the
tube hood
into the frame.
2.
Swing the footrest inwards till it clicks in
position.
3.
Swing the foot plate downwards.
To take off the footrests:
1.
Pull handle .
2.
Swing the footrest to the outside of the
wheelchair till it comes loose from the
guidance.
3.
Pull the footrest from tube hood
The folding of the backrest
is done as follows:
1. Pull on the levers , until
2. Pull the upper backrest
To unfold the backrest:
1. Pull the backrest tubes
2. Check that the backrest
Page 8
Bobby
2015-02
.
the pin comes out the
hole.
tubes downwards until
the backrest is fully
folded.
upwards until the
backrest is firmly
secured.
is locked in place.