■ Starting and Driving
• Make sure the seat is installed properly.
• Make sure the tiller has been secured properly.
• Fold down the armrests so you can rest your arms on them.
• Turn the power switch to "ON".
• Check battery indicator to see whether there is enough power for your journey. If you
have any doubt about the remaining power, please recharge the batteries before
departure.
• Set the speed dial to a position you feel safe and comfortable with.
• Check the forward/reverse speed lever works correctly.
• Make sure the electromagnetic brake works correctly.
• Before driving, ensure it is safe to do in the environment around you.
Attention
1. Do not push both RH & LH sides of the speed control lever simultaneously. This
might leave you unable to control your scooter.
2. Do not turn the power switch to OFF while driving as this will lead to an emergency
stop and possible risk of accident and injury.
3. Do not set to the highest speeds whilst driving indoors.
4. Do not adjust the speed dial whilst driving, a sudden change in speed may cause
danger to you and others, and may cause damage to your scooter.
5. Do not place magnetic devices near the area of the operation handle as this could
affect the safe operation of your scooter. The scooter controller is located under the
foot way.
6. Do be careful whilst driving in heavy traffic or crowded areas.
7. Whilst reversing the vehicle, beware of people or objects behind you.
♦ Stopping
• Release the speed control lever completely. The vehicle will naturally brake and stop.
• Turn the power off. Then pull out the key.
Attention
1. The stopping distance will vary with your forward / reverse speed. Therefore please
begin braking as early as you can.
2. When parking your scooter, be sure to park on flat ground and then turn the power to
"OFF" before you dismount.
5 . D R I V I N G O N T H E ROA D
14