Setting Up The Pc; Installation Location; Environmental Requirements; Ergonomics - Medion P2125 D Manual Del Usuario

USA

Setting up the PC

Setting up the PC

Setting up your PC in the right way helps to ensure that your PC is
comfortable to operate.

Installation location

• Set up all components on a stable, level and vibration-free surface
and only operate them on a surface of this kind to prevent the PC
from malfunctioning.
• Keep your PC and all connected devices away from moisture
and avoid dust, heat and direct sunlight. This will avoid faults or
damage to your PC.
• Your PC is not suitable for use at VDU workstations within the
meaning of §2 of the German VDU workstation regulation.

Environmental requirements

• The PC can be operated at an ambient temperature of +10 °C to
+35 °C and at a relative humidity of 30% - 70% (non-condensing).
• When switched off, the PC can be stored at temperatures from
-20 °C to 50 °C.
• During a thunderstorm, disconnect the mains plug and, in
particular, remove the network cable and, if applicable, the
antenna cable. For extra safety, we recommend using an
overvoltage protection device to prevent your PC from sustaining
damage from the mains supply as a result of power surges or
lightning strikes.
• After transporting the PC, wait until it has reached ambient
temperature before switching it on. Major changes in temperature
or fl uctuations in humidity can cause moisture to build up within
the PC due to condensation – this can cause an electrical short
circuit.

Ergonomics

Avoid dazzle, refl ections and strong bright-dark
contrast in order to protect your eyes.
18
www.medionusa.com
AFTER SALES SUPPORT
+1 866 633 4660
USA