Medion P2125 D Manual Del Usuario página 21

phones, DECT telephones, etc.) in order to avoid malfunctions and
data loss.
• Please note that only shielded cables that are shorter than 3 meters
may be connected to the external interfaces of this PC. Please only
use double-shielded cables for printer cable connections.
• Position the cable so that it cannot be stepped on or tripped over.
• To avoid damaging the cables, do not place any objects on them.
• In order to prevent cable breaks, do not crush or bend cables,
because this could cause a short circuit.
• Do not apply force when connecting cables and plugs and make
sure that connectors are the right way round.
• Do not connect any devices to the PC which do not meet the
requirements set out in the EN60950 standard "Information
Technology Equipment – Safety" or the EN60065 standard "Audio,
video and similar electronic apparatus - Safety requirements".
• Only connect peripheral devices – such as keyboard, mouse and
monitor, etc. – when the PC is switched off to avoid damage to the
PC or the devices.
Some devices may also be connected while the computer
is running. This is generally the case for devices with a USB
connection. In all cases, observe the relevant operating
instructions.
• In addition, when connecting your peripherals only use the
connecting cables supplied with those devices.
• Do not expose plug connections to impacts/pressure, e.g. from
lateral forces. This could cause internal and external damage to the
product.
• When you disconnect a cable from your device, pull it out by
holding the plug and not the cable.
• Do not exchange the supplied cable for another one. Use only the
supplied cable as this cable has been extensively tested in our
laboratory.
• Ensure that all connection cables are connected to their
corresponding peripheral device to avoid any interference
radiation. Disconnect any cables that are not required.
AFTER SALES SUPPORT
+1 866 633 4660
USA
USA
Connecting
21
www.medionusa.com