Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
1.
Push the button to open the front cover. Opening
it until a click is heard allows a positive stop at that
position.
2
► 1. Front cover 2. Button
2.
Pull out both the orange-colored dust stopper and
dust bag/paper filter together at the same time.
1
► 1. Dust stopper
3.
Perform the procedures below depending on the
dust container type:
When using the dust bag
Remove the dust stopper and empty the dust bag.
1
► 1. Dust stopper 2. Dust bag
When using the paper filter
Remove the dust stopper and dispose of the paper filter.
1
1
► 1. Dust stopper 2. Paper filter
4.
Place the dust bag/new paper filter and dust stop-
per together into the cleaner and close the front cover.
NOTE: The cleaner is constructed in such a way that
the front cover comes off when trying to force the
front cover open at the angle of more than 90°. If the
front cover comes off, insert it into the front cover joint
in place.
► 1. Front cover 2. Front cover joint
MAINTENANCE
CAUTION:
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
2
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
NOTICE:
alcohol or the like. Discoloration, deformation or
cracks may result.
12 ENGLISH
Always be sure that the tool is
Never use gasoline, benzine, thinner,
2
1
2
Publicidad
Tabla de contenido
