SEVERIN SM 3807 Instrucciones De Uso página 9

Ocultar thumbs Ver también para SM 3807:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
instructions are not complied with.
 Caution: Any misuse can cause severe
personal injury.
 Th is appliance is intended for domestic or
similar applications, such as in
- shops, offi ces and other similar working
environments,
- agricultural areas,
- hotels,
motels
establishments,
- bed-and breakfast type environments.
 In order to comply with safety regulations
and to avoid hazards, repairs of electrical
appliances must be carried out by qualifi ed
personnel, including the replacement
of the power cord. If repairs are needed,
please send the appliance to one of our
customer
service
addresses can be found in the appendix to
this manual.
Before using for the fi rst time
– Before the appliance is used for the
fi rst time, all detachable parts must be
thoroughly cleaned as described in the
section General Care and Cleaning.
Short-time operation
Th e appliance is designed to process average
domestic quantities of food; it can be operated
without interruption for a maximum of 1
minute, when it should be allowed to cool
down for approximately 5 minutes.
Operating button
Th e blender is equipped with a 2-position
operating button.
Button half depressed - low power
Button fully depressed - high power
Blender operation
– Always use a suitable container for
operation. A tall container with a fl at base
is best.
– Push the blender unit down into the
ingredients in the bowl before briefl y
switching the unit on with the operation
button.
etc.
and
similar
departments.
Th e
– Make sure that the unit can rotate freely
inside the bowl and is not blocked during
operation.
– As soon as the operating button is
released, the blender will switch off .
Always wait until the motor has come
to a complete standstill before lift ing the
blender attachment from the mixture.
– Always remove the plug from the wall
socket aft er use.
Attachments
Remove the plug from the wall socket and
wait until the motor has come to a complete
standstill before changing any attachments.
Th e blade unit and blender disc both screw
on and off . Before removing, ensure that the
drive pin on the shaft of the blender unit sits
properly in its recess; then use a suitable cloth
to grip the attachment, turning it clockwise to
unscrew and remove. (Caution: the blades
are extremely sharp.) In the same way, when
fi tting an attachment, use a cloth to grip and
turn it anti-clockwise to tighten.
– Blade unit
Th e blade unit is suitable for processing
fruit and vegetables, and when preparing
baby food, purée or mashed food.
– Blender disc
Th e blender disc is suitable for any kind
of liquid - milk, yoghurt, mayonnaise,
cocktails etc.
Sieve and blender jug
Th e sieve can be inserted in the blender jug.
When processing fruit and vegetables, the
juice is collected in the jug while the pulp
remains in the sieve. Do not fi ll with hot
liquid.
Blender models with additional chopping
attachment
With the normal blending rod removed, the
drive unit can be attached to the chopping
attachment.
– Fit the cutting blade unit into the bowl
before fi lling the bowl with the food to
be chopped. Exercise extreme caution:
9

Publicidad

Tabla de contenido
loading

Tabla de contenido