Introduction Of Advanced Built-In Cd Player (Mp3/Wma/Aac/Wav) Operation; Repeating Play; Playing Tracks In Random Order; Scanning Folders And Tracks - Pioneer DEH-P6800MP Manual De Instrucciones

Section
07 MP3/WMA/AAC/WAV Player
Introduction of advanced
built-in CD player (MP3/
WMA/AAC/WAV) operation
1 Function display
Shows the function status.
% Press FUNCTION to display the function
names.
Press FUNCTION repeatedly to switch be-
tween the following functions:
Repeat (repeat play)Random (random play)
Scan (scan play)Pause (pause)folder
listComp./BMX (compression and BMX)
FF/REV (search method)
# To return to the playback display, press BAND.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the playback display.

Repeating play

For MP3/WMA/AAC/WAV playback, there are
three repeat play ranges: FOLDER (folder re-
peat), TRACK (one-track repeat) and DISC (re-
peat all tracks).
1 Press FUNCTION to select Repeat.
Press FUNCTION until Repeat appears in the
display.
2 Press c or d to select the repeat range.
Press c or d until the desired repeat range ap-
pears in the display.
! FOLDER  Repeat the current folder
! TRACK  Repeat just the current track
! DISC  Repeat all tracks
28
En
1
Notes
! If you select another folder during repeat play,
the repeat play range changes to DISC.
! If you perform track search or fast forward/re-
verse during TRACK, the repeat play range
changes to FOLDER.
! When FOLDER is selected, it is not possible to
play back a subfolder of that folder.

Playing tracks in random order

Random play lets you play back tracks in a
random order within the repeat range,
FOLDER and DISC.
1 Select the repeat range.
Refer to Repeating play on this page.
2 Press FUNCTION to select Random.
Press FUNCTION until Random appears in
the display.
3 Press a to turn random play on.
Random : ON appears in the display. Tracks
will play in a random order within the pre-
viously selected FOLDER or DISC ranges.
4 Press b to turn random play off.
Random :OFF appears in the display. Tracks
will continue to play in order.

Scanning folders and tracks

While you are using FOLDER, the beginning of
each track in the selected folder plays for
about 10 seconds. When you are using DISC,
the beginning of the first track of each folder
is played for about 10 seconds.
1 Select the repeat range.
Refer to Repeating play on this page.
2 Press FUNCTION to select Scan.
Press FUNCTION until Scan appears in the
display.