Tabla de contenido
Publicidad
Shooting
Focusing
Focus Mode
Selects the focus method to suit the movement of the subject.
The focus mode switching method depends on the attached lens.
1
If the lens has a focus mode switch, set it to "AF" or "MF."
• With an SSM lens or an SAM lens that supports DMF (Direct Manual
Focus)*, you can switch the focus mode to any mode including the
auto focus and manual focus modes by operating the camera, even
when the focus mode switch on the lens is in the "AF" position.
* SAL18135 only (as of the day this camera was released)
2
MENU
setting.
• When you want to use the auto focus function, set the focus mode
switch on the lens to "AF." If the focus mode switch on the lens is set
to "MF," the focus mode will be locked to [Manual Focus].
• If the lens supports the Hybrid Phase Detection AF system,
every auto focus mode will use the Hybrid Phase Detection AF
system as the focus detection method in the default settings. The
focus detection method can be changed by selecting MENU
(Camera Settings1) [AF System].
(Single-shot AF): The product locks the focus once focusing is
complete. Use this when the subject is motionless.
(Automatic AF): [Single-shot AF] and [Continuous AF] are
switched according to the movement of the subject. When the
shutter button is pressed halfway down, the product locks the focus
when it determines that the subject is motionless, or continues to
focus when the subject is in motion. During continuous shooting,
the product automatically shoots with Continuous AF from the
second shot.
GB
34
(Camera Settings1) [Focus Mode] desired
Publicidad
Tabla de contenido
