Manual Focus
When it is difficult to focus properly in the autofocus mode, you can
adjust the focus manually.
1
Set the focus mode switch on the lens to "MF."
• With an SSM lens or an SAM lens that supports DMF (Direct Manual
Focus)*, you can switch the focus mode to the manual focus mode by
operating the camera, even when the focus mode switch on the lens
is in the "AF" position.
* SAL18135 only (as of the day this camera was released)
2
If the lens does not have a focus mode switch, select MENU
(Camera Settings1) [Focus Mode] [Manual Focus].
• If [Focus Mode] has been assigned to the front multi-controller, you
can also change the setting by operating the front multi-controller
(page 20).
3
Rotate the focusing ring to
achieve sharp focus.
4
Press the shutter button fully down to shoot an image.
Note
• When you use the viewfinder, adjust the diopter level to obtain the correct
focus on the viewfinder (page 14).
GB
40