Adjusting The Arm Support - Vermeiren V200 XL Manual De Instrucciones

3.5.2 Adjusting angle foot plate
Adjust the angle of the foot plate as follow:
1. Loosen bolt .
c
2. Adjust tube d in the desired angle. The angle indication (80° -85 ° -90° -95° -100° ) is
according the dashes e.
3. Retighten the bolt
3.6

Adjusting the arm support

The arm support of your wheelchair can be adjustable in height and depth. The height of the
arm support can be adjusted in 3 positions.
Height armsupport to seat Number of the blocks
220 mm (8.66 in.) (Standard)
230 mm (9.06 in.)
240 mm (9.45 in.)
The depth of the armrest can be adjusted in 3 positions.
Depth of the armrest
Front position
Middle position (Standard)
Back position
.
c
under the tube
2
1
0
Table 3: Height of arm support
Table 4: Depth of armrest
ƒ‰‡
Number of blocks between
tube and armrests
1
2
3
Used holes
Back and middle
Hole 2 and 4
Front and middle
V200 XL
2012-02