Connecting To Audio Equipment; Connecting Cable - Harman AKG HSC 171 Modo De Empleo

Setting up
Connecting to Audio
Equipment

Connecting Cable

24
HSC 171, HSC 271
6-pin mini XLR connector
shield,
1
audio ground
5 audio inphase
6 mute signal
shield,
2
ground
3 audio left
4 audio right
HSD 171, HSD 271
6-pin. mini XLR connector
shield,
1
audio ground
5 audio inphase
6 audio return
shield,
2
ground
3 audio left
4 audio right
The microphone cable is welded to the headphone cable. If the headphone
output is too far away from the microphone input, you can simply pull the
microphone cable away from the headphone cable. The sliding bush lets you
bundle the separated cables together again.
1/4" jack XLR connector on phantom
plug power adapter (balanced)
1
audio ground
audio inphase, phantom
2
audio return, phantom
3
shaft
tip
ring
1/4" jack
XLR connector (balanced)
plug
1
audio ground
2 audio inphase
3 audio return
shaft
tip
ring
HSC 171 HSC 271 HSD 171 HSD 271
shield,
voltage
voltage
shield,