Background Operations; Time - Out Timer (Tot); Busy Channel Lockout (Bcl); Signal Strength Indicator - Kenwood TK-7180 Manual De Instrucciones

T - T (TOT)
IME OUT IMER
The purpose of the Time-out Timer is to prevent any caller from using a channel
for an extended period of time.
If you continuously transmit for a period of time that exceeds the programmed time
set by your dealer (default is 1 minute), the transceiver will stop transmitting and an
alert tone will sound. To stop the tone, release the microphone PTT switch.
Your dealer can program the TOT time in the range of 15 seconds to 20 minutes.
B C L
USY HANNEL
When activated, BCL prevents you from interfering with other parties who may be
using the same channel that you selected. Pressing the microphone PTT switch
while the channel is in use will cause your transceiver to emit an alert tone and
transmission will be inhibited (you cannot transmit). Release the PTT switch to
stop the tone and return to receive mode.
If activated, you can override this function. To override BCL, press the
microphone PTT switch again immediately after releasing it (within half a second).
Note: Ask your dealer for an explanation on how BCL functions when using QT, DQT, DTMF,
5-tone, or FleetSync signaling.
S S
IGNAL TRENGTH
The signal strength indicator displays the strength of received calls:
Strong signal
Medium signal
Weak signal
Very weak signal
B / E
EGINNING ND OF
The Beginning of Transmit and End of Transmit identification signals are used to
access and release some repeaters.
If Beginning of Transmit is set, the ID signal is transmitted when you press the
microphone PTT switch.
If End of Transmit is set, the ID signal is transmitted when you release the
microphone PTT switch.
If both are set, the ID signal is transmitted when you press and release the
microphone PTT switch.
24

BACKGROUND OPERATIONS

(BCL)
OCKOUT
I
NDICATOR
T S
RANSMIT IGNAL